How to Remove Rust From Golf Clubs – 6 Simple DIY Tricks!

Are you dissatisfied with the rusty look your golf clubs have adopted over the winter break? Or are you about to buy a great second-hand set but are apprehensive about the rust-covered look? Well, whatever the reason, we found some easy DIY tricks that can help you learn how to remove rust from golf clubs!

As long as the grooves are fine, you don’t need to spend an excessive amount of money replacing your golf clubs. Many hacks incorporate everyday items which you can use to get the rust off your clubheads quickly.

This article will look at removing rust from golf clubs and making them look brand new again. 

1. Steel Wool

How to Remove Rust From Golf Clubs

Steel wool is a handy metallic sponge for scrubbing pots. Well, it can also help restore lightly-rusted clubs to their original form. All you have to do is run the sponge over the affected area. 

However, you have to be cautious about the amount of pressure you apply. Otherwise, you could chip the paint or leave unsightly scratches on the surface of your club. If you’re unsatisfied with the results of the steel wool sponge, you can employ one of the other, gentler methods. 

2. Aluminum Foil

Alternatively, you could use aluminum foil to restore your clubs. This hack is handy if you’re worried about causing further damage to your iron with harsh steel wool.

Grab some aluminum foil from your store and crumple it into a ball-like shape. It would help if you aimed for a form that fits into your palms easily, as that would make it easier to handle. 

Next, rub the rust-covered surface of your golf clubs to remove the brown-colored specks. Once most of it is gone, you can go in with a microfiber cloth and some basic cleaner to remove the rest.

3. Soap and Water

Before bringing out the big guns, you should try the classic soap and water solution. For the best result, use warm water. Any soap will do, but it’s better to use a gentle detergent or liquid soap. 

Once you’ve mixed these ingredients in a bucket, let your club soak in the mix for 10 – 15 minutes. After that, you should notice rust particles in the water–that is, if the rust isn’t too deeply seated. Then you can take a cloth and wipe off the residue. You can use a hard-bristle brush to dislodge tougher specks. If it doesn’t work, you can try the next method. 

4. Coca-Cola 

That’s right! Coca-Cola is a nifty solution to restore your clubs’ shine. The key ingredient, which gets rid of the rust, is phosphoric acid. Any cola will do, as long as it contains phosphoric acid. 

Whichever soda you use, make sure there’s enough to submerge your clubheads inside a container. You should let the clubs sit in the soda container for at least 24 hours for maximum results. After that, you can wipe away the remnants with a microfiber cloth. If some of the rust is deeply seated, you can go in with a hard-bristle brush, which should help remove stubborn stubs of rust embedded in the grooves. 

5. Vinegar

VinegarAnother hack to remove rust from your golf clubs is to use vinegar. A pantry staple and a common cleaning agent, vinegar is tough on stains! This quality is due to its acidity. But since rust is relatively more challenging to remove than most stains, you’ll need to combine the vinegar with other household ingredients. 

Thus, you can either opt for salt or lemon juice. Like vinegar, lemon juice is quite acidic and produces faster results. But if given enough time, salt has similar effects. Also, you’ll need a container that can comfortably contain the wedge of your clubs. 

Once you’ve assembled the right items, make a solution from vinegar and lemon juice in the container. Then, place your golf club in the mixture, ensuring that the rusty part is wholly submerged. In two hours or less, the rust should start to come off. However, if you’re using a vinegar and salt solution, you’ll need to wait about 24 hours. Next, using a stiff bristle brush or cloth, scrub away the leftover residue. 

6. Rust Remover

Should none of the other methods work, your last resort is rust remover. As rust remover contains several harsh chemicals that can mar the iron of your golf clubs, it’s not the best option. So to avoid further damage, it would be best for you to adhere to the instructions. 

You can find an industrial rust remover at your local hardware store. Most of them are spray-on, so you should take precautions by laying out paper or cardboard to avoid getting the solution on other objects. In a few minutes, the remover should dissolve the rust, and you can wash off the residue with water and a cloth. Remember to follow the directions carefully! 

Conclusion on How to Remove Rust From Golf Clubs

It can be annoying playing with a pair of rust-covered golf clubs. Even if it doesn’t throw off your game, it could be displeasing in appearance. Hopefully, one of the fixes here can assist you, so you won’t have to buy a new set!

To recap, we outlined how to remove rust from golf clubs using everyday ingredients such as coke and vinegar. If those don’t work, you can employ an industrial rust remover. May your rusty clubs look good as new in no time!

Leave a Comment